Spare Bearing For Pol02

Features

• Genuine Tork Craft spare bearing for the POL02 wool bonnet polisher.
• Matched to the original bearing specification used in production.
• Supports smooth rotation of the polisher’s moving components.
• Helps to reduce excessive noise and vibration during use.
• Compact spare part that is easy to keep on hand for maintenance.
• Designed for use with 1200W variable-speed rotary polishing work.

Benefits

• Restores smooth running and helps improve handling comfort.
• Can extend the working life of the POL02 polisher when replaced timeously.
• Reduces the risk of rough running that can spoil the final surface finish.
• More reliable performance during continuous or professional use.
• Correct spare part fitment gives peace of mind over generic bearings.

Extra Information

Common signs that a bearing may need replacement include a growling noise, increased vibration, noticeable play on the spindle or a polisher that does not feel as smooth as it used to. Replacing the worn bearing before it fails completely can prevent secondary damage to housings, gears or the motor.

When you service a Tork Craft POL02 polisher, it is good practice to inspect the bearings, brushes, cable and switch at the same time. Using genuine POL02-13 spares keeps the machine aligned with the original design and makes future maintenance and troubleshooting more straightforward for technicians and users alike.

Pro Tip

Pro Tip: After fitting the new bearing and reassembling the polisher, run the POL02 at a lower speed with no load for a short while to confirm smooth operation before returning it to full work. While the machine is open, take the opportunity to blow out dust, check the wool bonnet and backing pad, and give the tool a quick overall inspection for cracks or loose screws.

Specifications

Safety

• Always unplug the polisher from the mains before opening the housing or working on internal parts.
• Allow the tool to cool down fully before handling components near the motor or gearing.
• Ensure all screws, covers and guards are properly refitted before use.
• Only use the POL02-13 spare bearing on the specified Tork Craft POL02 model.
• If you are unsure about disassembly or reassembly, consult a qualified technician or an approved service centre.